Passenger Occupant Detection System, Removing And Installing: Notes
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- The passenger occupant detection system is only installed in the passenger seat.
- The service kit for the passenger occupant detection system must always be installed completely.
- This means that the components that belong together from the passenger occupant detection system service kit (Passenger Occupant Detection System Control Module -J706- and Front Passenger Occupant Detection Sensor -G128-) must always be installed.
- Exchanging of a component Passenger Occupant Detection System Control Module - J706- or Front Passenger Occupant Detection Sensor -G128- with another vehicle is not permitted.
- The parts of the service kit are different depending on the seat version. Refer to the Parts Information.
Special tools and workshop equipment required
- Pry Lever: 80-200