Glove Compartment Handle, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Release the hooks -2- for the glove compartment handle -arrow A- through the opening on the side on the glove compartment lid with a small screwdriver -1- (approximately 70 mm long) or Torx screwdriver T10 (approximately 80 mm long).
-- Carefully disengage the glove compartment handle -3- at the same time with the : 80-200 from the hooks -arrow B-.
-- Press the glove compartment handle and release retaining the hook -1- at the side of the glove compartment opener using a screwdriver.
-- Pry up the glove compartment handle -2- carefully from the glove compartment lid -arrow- with the : 80-200 .