Sun Shade, Removing And Installing, Rear Window: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Unclipping Cover From Rear Window Shade -1- Using Trim Removal Wedge 3409 -Arrows- And Remove It
-- Remove the rear lid lower trim panel. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .
-- Unclip the cover -1- with the : 3409 from the sun shade -arrows- and remove.
-- Remove the bolts -2 and 3-.
-- Remove the sun shade -1- from the rear lid lower trim panel -arrows-.
-- Remove any remaining clips in the sun shade mounting points using the : T40280 . To install, insert into the trim panel.