Voice Recognition System, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Audi SQ7, 2022 Audi S7, and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Install the Information Electronics Control Module 1 -J794-. Refer to Information Electronics Control Module 1 -J794-, REMOVING AND INSTALLING .
Perform the following function test:
-- Switch on the Radio -R-.
-- Press the PTT button on the multifunction steering wheel briefly.
A "ping" tone sounds and the voice recognition system is active.
-- Say the command "Help".
If the Radio -R- is active, the voice recognition system responds with "Radio commands are...".
Depending on the equipment, other functions can be selected:
-- If a telephone is installed, say "telephone".
The voice recognition system switches to the telephone mode.
-- Press the PTT button for 1 second.
The voice recognition system responds with "Cancel" and is deactivated.