Left Front Treble Speaker -R20- /Right Front Treble Speaker -R22-, REMOVING AND INSTALLING, 8RM/9VD: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7, 2022 Audi S7, and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Remove the outer speaker trim. Refer to SPEAKER TRIM, REMOVING AND INSTALLING .
-- Remove the bolts -1- on the Left Front Treble Speaker -R20- -2- and then remove the Left Front Treble Speaker -R20- -2- upward from the centering pins -3-.
Fig 1: Locating Screws -1- On Left Front Treble Speaker -R20- -2- And Remove Left Front Treble Speaker -R20- -2- Upward From Centering Pins -3-
-- Release and disconnect the connector from the Left Front Treble Speaker -R20- -2-.