LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Communication (1 Of 2)) >> 91 Communication >> Antenna Systems >> Near Field Communication Control Module 2 -J1170-, REMOVING AND INSTALLING >> Removing

Near Field Communication Control Module 2 -J1170-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2022 Audi SQ7, 2022 Audi S7, and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.

-- Remove the center console cover. Refer to CENTER CONSOLE COVER, REMOVING AND INSTALLING .

The Close Range Communication Control Module 2 -J1170- -1- is clipped into the center console.

GWWA91-13076Courtesy of AUDI OF AMERICA, LLC

-- Press the retainers in direction of -arrows- outward.

-- Remove the Close Range Communication Control Module 2 -J1170- -1- from the center console cover -2-.

-- Release and disconnect the connectors -3-.