LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Communication (1 Of 2)) >> 91 Communication >> Antenna Systems >> Close Range Communication Antenna, Removing And Installing >> Removing

Close Range Communication Antenna, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi SQ7, 2022 Audi S7, and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.

-- Remove the center speaker trim. Refer to OVERVIEW - INSTRUMENT PANEL .

-- Release the catches -2- for the Near Field Communication Antenna -R269- -1-.

Fig 1: Identifying Close Range Communication Antenna -R269-
GWWA91-12287Courtesy of AUDI OF AMERICA, LLC

-- Tilt the Near Field Communication Antenna -R269- -1- in the direction of -arrow- out of the holder in the instrument panel.

-- Release and disconnect the connector -3- from the Near Field Communication Antenna -R269- -1-.

-- Remove the Near Field Communication Antenna -R269-.