LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Communication (1 Of 2)) >> 91 Communication >> Antenna Systems >> Antenna Amplifier, Removing And Installing >> Antenna Amplifier -R24- Antenna Amplifier 2 -R111- /TV Antenna Amplifier 1 -R82- /TV Antenna Amplifier 3 -R84-, REMOVING AND INSTALLING >> Removing

Antenna Amplifier -R24- Antenna Amplifier 2 -R111- /TV Antenna Amplifier 1 -R82- /TV Antenna Amplifier 3 -R84-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2022 Audi SQ7, 2022 Audi S7, and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.

-- Remove the rear lid upper trim panel. Refer to REAR LID UPPER TRIM PANEL, REMOVING AND INSTALLING .

-- Release and disconnect the connectors -2, 4, and 6- on the antenna amplifier.

GWWA91-12444Courtesy of AUDI OF AMERICA, LLC

-- Release and disconnect the connectors from the rear window antennas.

-- Loosen the screws -arrows- several turns and remove the antenna amplifier from the rear lid.