Vehicle Diagnostic Tester, Connecting
WARNING: This page is about a different car, the 2021 Audi SQ7 and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
- Remote Diagnosis Head: VAS5054A
- Or: Diagnosis Interface: VAS5055
CAUTION:
Risk of injury due to unintended engine start on high-voltage vehicles!
- Pay attention to the high-voltage system warning messages:
- For procedures where the ignition must be switched off, refer to the appropriate Service Information .
Procedure:
-- Attach the connector for the : VAS5054A to the diagnostic connection in the vehicle.
-- Turn on the Vehicle Diagnostic Tester.
-- Switch on the ignition.
-- Follow the screen menu to start the desired function.