Windshield Spray Nozzles, Adjusting
WARNING: This page is about a different car, the 2021 Audi SQ7 and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Procedure:
-- Align the adjusted nozzles units above the adjusting screw -2- according to the specification, using a tool with an external TORX® size 9 -3-.
-- If the spray pattern still does not meet the specifications, clean the corresponding spray nozzles. Refer to the appropriate Service Information .
NOTE:
The water jets of a nozzle unit can only be adjusted together and the height is adjusted via an adjusting screw. It is not possible to adjust the water jets individually or to adjust just one side.