Seat Belts, Checking Presence Of Seat Belt Stop Buttons And Retractor Locking Function
WARNING: This page is about a different car, the 2021 Audi SQ7 and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Procedure:
On All Existing Seat Belts:
-- Make sure the stop buttons or the stopper clips are present.
-- Check the locking behavior of the retractors by unrolling them with a jerk.
NOTE:
On the seat belt webbing from the rear outer seat this type of loops can be found instead of stop buttons.
If objects are secured with the seat belt (for example, a child seat), do not loosen the seat belt. Only check the locking behavior with the belt secured. Checking the stop button or stopper clip is not required in this case.