Ribbed Belt For Sub-Assembly, Belt TENSIONER, Idler Pulleys And Belt Pulley Water Pump, Replacing
WARNING: This page is about a different car, the 2021 Audi SQ7 and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Procedure:
-- Replace the sub-assembly ribbed belt according to the repair information specifications. Refer to RIBBED BELT, REMOVING AND INSTALLING .
-- Replace the belt tensioner, idler pulleys and belt pulley according to the repair information specifications. Refer to OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE
NOTE:
Only applies to Q7 e-tron.