REDUCING AGENT (ADBLUE®), FILLING USING AdBlue Filling System: VAS6960
WARNING: This page is about a different car, the 2021 Audi SQ7 and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- AdBlue Filling System VAS6960: VAS6960
Procedure:
-- Open the fuel filler door and remove the cap for the reducing agent tank.
-- Using a lint-free cotton cloth soaked in water, clean the filler neck for the reducing agent.
-- Guide the nozzle of the : VAS6960 into the reducing agent tank filler neck.
-- Operate the nozzle and completely fill the reducing agent.
-- Remove the nozzle from the reducing agent tank filler neck.
-- Use a lint-free cotton cloth soaked in water to clean the reducing agent tank filler neck and cap.
-- Attach the cap for the reducing agent tank.
NOTE:
Pay attention to the : VAS6960 Owner's Manual.
The nozzle for the : VAS6960 switches off automatically when the maximum fill level is reached.