Overview - B-Pillar Trim Panel
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Clip
- Quantity: 4
- Insert in the trim panel
- Remove any remaining clips in the body mounting points using the Omega Clip Tool: T40280 . To install, insert into the trim panel.
- Replace damaged or deformed clips
- Speaker
- Removing and installing. Refer to OVERVIEW - SOUND SYSTEM, COMPONENT LOCATION .
- Bracket
- Clipped in the B-pillar
- Press on it until it locks
- Removing and Installing. Refer to B-PILLAR UPPER TRIM PANEL, REMOVING AND INSTALLING .
- B-Pillar Upper Trim Panel
- Insert in the upper part of the mounting points on the roof and clip into the bracket
- Press on until it engages audibly
- Stretch the door seal lip over.
- Removing and Installing. Refer to B-PILLAR UPPER TRIM PANEL, REMOVING AND INSTALLING .
- Vent
- Connect electrical harness connector, first insert lower vent in the trim and press on it until it engages audibly
- Removing and Installing. Refer to B-PILLAR UPPER TRIM PANEL, REMOVING AND INSTALLING .
- Speaker Adapter
- Clip into the speaker trim
- Speaker Trim
- Clipped in the B-pillar trim panel
- Press on until it engages audibly
- Removing and Installing. Refer to SPEAKER TRIM, REMOVING AND INSTALLING .
- B-Pillar Lower Trim Panel
- Clipped in the B-pillar
- Press on until it engages audibly
- Stretch the door seal lip over.
- Equipped on some models on the front passenger side: with Air Ionization System Button -E677-
- Removing and Installing. Refer to B-PILLAR LOWER TRIM PANEL, REMOVING AND INSTALLING .
- Front Sill Panel
- Engage the sill panel strip in the B-pillar trim.
- Press on until it engages audibly
- Stretch the door seal lip over.
- Removing and Installing. Refer to FRONT SILL PANEL, REMOVING AND INSTALLING .