LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Interior Trim) >> 70 Interior Trim >> Rear Door Trim Panels >> Window Frame Trim Panel, Removing And Installing >> Removing

Window Frame Trim Panel, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Screws -1- And Remove Mount -2- From Window Frame
GWWA70-11676Courtesy of AUDI OF AMERICA, LLC

-- Lower the door window.

-- Remove the door trim panel. Refer to REAR DOOR TRIM PANEL, REMOVING AND INSTALLING .

-- If installed, remove the screws -1- and remove the mounting eye -2- from the window frame.

-- Loosen the trim panel at the ends of the adhesive pads -1 and 3- from the door using the : 3409  .

Fig 2: Window Frame Trim Panel & Window Frame Trim Panel
GWWA70-11905Courtesy of AUDI OF AMERICA, LLC

-- Pry off the window frame trim panel -2- starting at the bottom and carefully working along the length of the window guide to the top rear -arrows-.

-- Remove the trim panel downward from the window frame.