Speaker Mount, Removing And Installing

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Trim Removal Wedge: 3409
Wedge Set: T10383

Center Speaker Mount, Removing:

Courtesy of AUDI OF AMERICA, LLC

-- Remove the speaker trim. Refer to SPEAKER TRIM, REMOVING AND INSTALLING .

-- If installed, remove the speaker. Refer to OVERVIEW - SOUND SYSTEM, COMPONENT LOCATION .

-- Remove the bolt -2-.

-- Disengage the speaker mount -1- using the : T10383/1 -arrow-.

-- Disengage the remaining retainers for the speaker mount and remove.

Outer Speaker Mount, Removing:

Courtesy of AUDI OF AMERICA, LLC

-- Remove the speaker trim. Refer to SPEAKER TRIM, REMOVING AND INSTALLING .

-- If installed, remove the speaker. Refer to OVERVIEW - SOUND SYSTEM, COMPONENT LOCATION .

-- Remove the bolt -1-.

-- Disengage the speaker mount -2- using the : 3409 -arrows-.

Installing

Install in reverse order of removal and note the following:

-- Before installing, check all the fasteners for damage and replace if necessary.