Display Control Head Trim, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the steering wheel as far up and backward as possible to be able to use the entire steering column adjustment range.
-- Remove the instrument panel cover on the driver side. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
-- Remove the front passenger side instrument panel side cover. Refer to INSTRUMENT PANEL SIDE COVER, REMOVING AND INSTALLING .
-- Remove the bolt -1-.
-- Open the glove compartment cover and remove the screws -2 and 3-.
-- Unclip the trim with the A/C display control head using the : T10383/1 -arrows-.
-- Disconnect the connectors and remove the trim with the A/C display control head.