Midrange Speaker Trim, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of AUDI OF AMERICA, LLC
|
Install in reverse order of removal and note the following:
-- When using a speaker trim that has already been welded, drill the screw holes to a 3.0 mm diameter and secure with a screw -1-.
-- Insert the new speaker trim into the door trim panel and secure the plastic domes with lock washers -2-.