Oil Separator, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the cylinder ignition coils "3 and 4". Refer to IGNITION COILS, REMOVING AND INSTALLING .

-- Remove the bolt -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Release the catch in direction of -arrow-, remove the crankcase ventilation hose -1-, and free it up.

-- Loosen the hose clamp -1- and remove the hose from the EVAP Canister Purge Regulator Valve 1 -N80-.

Fig 1: Locating Oil Separator Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and the oil separator.