Ignition Coils, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the air filter upper section. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Remove the cap -2-.
-- Release the retainer in direction of -arrow B- and remove the oil filler tube -1- upward from the air filter lower section.
-- Turn the oil filler tube counter-clockwise in direction of -arrow A- and remove it.
-- Close the oil filler tube with the cap.
-- Loosen the hose clamp -arrow-, remove the air duct pipe from the air filter housing and push it slightly to the side.
All additional procedures are described. Refer to IGNITION COILS, REMOVING AND INSTALLING .