Vibration Damper, Removing And Installing, Starter Generator: Notes

WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Wrench - 21mm: T40263

Fig 1: Identifying Wrench - 21mm
Courtesy of AUDI OF AMERICA, LLC
Adapter: T40314

Fig 2: Adapter T40314
Courtesy of AUDI OF AMERICA, LLC
Counterhold: T40378 or

Fig 3: Counterhold T40378
Courtesy of AUDI OF AMERICA, LLC
Counterhold: T40379

Fig 4: Counterhold T40379
Courtesy of AUDI OF AMERICA, LLC
Vibration Damper Assembly Tool: T10531

Fig 5: Assembly Tool Set T10531
Courtesy of AUDI OF AMERICA, LLC
Assembly Tool - Adapter: T10531/5 , Assembly Tool - Tensioning Bolt: T10531/6

Fig 6: Vibration Damper Assembly
Courtesy of AUDI OF AMERICA, LLC

Fig 7: Locating Vibration Damper Bolt

Courtesy of AUDI OF AMERICA, LLC

The vibration damper bolt -A- connects the vibration damper -1-, the timing chain sprocket -2- and the crankshaft -3- with each other. Before removing the bolt, the chain sprocket must be secured to the crankshaft as described in the following.