LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Cooling System 2.0L) >> 19 Cooling System >> Coolant Pump/Coolant Regulation >> Coolant Valves, Removing And Installing >> Front Coolant Valve In The Engine/Motor Compartment, Removing And Installing >> Removing

Front Coolant Valve In The Engine/Motor Compartment, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
GWWA19-12446Courtesy of AUDI OF AMERICA, LLC

-- Remove the air filter upper section. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Disconnect the connector -2-.

-- Loosen the hose clamps -1-, then clamp off the coolant hoses with the : 3094  and remove them.

-- Remove the bolts -arrows- and remove the coolant valve.