Coolant Pump, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .
-- Disconnect the connectors -4 and 5- and, if equipped, also disconnect -2 and 3-.
-- Remove the bolt -1- and move the bracket -2- with the engine wiring harness to the side.
All additional procedures are described. Refer to COOLANT PUMP, REMOVING AND INSTALLING .