Suspension, AUDI Q7, From Product Improvement

WARNING: This page is about a different car, the 2022 Audi SQ7, 2022 Audi S7, and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Front axle	Multi-link suspension, transverse stabilizer coil springs: twin gas-filled struts, coil springs air suspension: air suspension strut with variable levels and damping characteristics, guide link with hydraulic damping mounts
Rear axle	Multi-link suspension with suitable spring/shock allocation, transverse stabilizer coil springs: twin gas-filled struts, coil springs air suspension: air suspension strut with variable levels and damping characteristics

Chassis

Standard coil springs 1BA in curb weight position. Refer to TEST REQUIREMENTS, AUDI Q7 => .

Standard air suspension 1BK at standard vehicle height. Refer to TEST REQUIREMENTS, AUDI Q7 => .

Sport air suspension 2MA at standard vehicle height. Refer to TEST REQUIREMENTS, AUDI Q7 => .

Sport air suspension 2MB at standard vehicle height. Refer to TEST REQUIREMENTS, AUDI Q7 => .

Wheelbase

2995⁽¹⁾

2999⁽¹⁾

3002⁽¹⁾

3002⁽³⁾

Wheel base TFSIe

2995⁽¹⁾

3000⁽²⁾

3002⁽²⁾

Front track width

1679⁽¹⁾

1685⁽¹⁾

1688⁽¹⁾

1672⁽³⁾

TFSIe track width

1673⁽¹⁾

1680⁽²⁾

1682⁽²⁾

Rear track width

1690⁽¹⁾

1693⁽¹⁾

1692⁽¹⁾

1676⁽³⁾

TFSIe rear track width

1685⁽¹⁾

1686⁽²⁾

1685⁽²⁾

⁽¹⁾	235/65 R18 ET20 tires

⁽²⁾	255/55 R19 ET23 tires

⁽³⁾	285/45 R20 ET28 tires

The specified values apply to all engine types.
The front/rear track width only applies with the respective tires.
Track widths change when using different wheel/tire combinations.
The specified size applies to equipment levels with air suspension on the standard vehicle height.