Body-Side Charge Air System

Fig 1: Exploded View Of Body-Side Charge Air System

Courtesy of AUDI OF AMERICA, LLC

Right Charge Air Cooler
- Removing and installing. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING .
- If there are small impressions on the slats. Refer to RADIATOR AND CONDENSER ASSEMBLY .
Adapter Grommet
Bolt
- 8 Nm
Air Duct Hose
- Must be free of oil and grease before installing
Bolt
- 8 Nm
- Quantity: 2
Spacer
- Quantity: 2
Upper Pressure Pipe
Pressure Hose to Throttle Valve
- Refer to OVERVIEW - CHARGE AIR SYSTEM .
Pressure Hose
Charge Air Pressure Sensor -G31-
- Removing and installing. Refer to Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING .
Bolt
- 2.5 Nm
Bolt
- 8 Nm
Rubber Grommet
Left Charge Air Cooler
- Removing and installing. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING .
- If there are small impressions on the slats. Refer to RADIATOR AND CONDENSER ASSEMBLY .
Rubber Grommet
Bolt
- 8 Nm
Rubber Grommet
Pressure Hose
Bolt
- 8 Nm
Rubber Grommet
Lower Pressure Pipe
- Removing and installing. Refer to LOWER PRESSURE PIPE, REMOVING AND INSTALLING .
Bolt to Turbocharger Pressure Pipe
- 8 Nm
- Quantity: 3
Pressure Pipe to Turbocharger
Pressure Hose
Rubber Grommet
Pressure Hose
Bolt
- 8 Nm
Adapter Grommet