Camshaft Position Sensor -G40-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, and 2021 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Disconnect the connector -3-.
-- Remove the bolt -1-, and remove the Camshaft Position Sensor -G40- -2-. (Shown with removed intake manifold.)