Turbocharger, Removing And Installing: Removing

• If there is mechanical damage to the turbocharger. Refer to FOREIGN OBJECTS IN ENGINE .
• Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Drain the coolant. Refer to DRAIN THE COOLANT .

-- Loosen the hose clamp -arrow-, remove the air duct hose and pivot it to the side.

Courtesy of AUDI OF AMERICA, LLC

-- Seal off any open lines and connections with plugs that are thoroughly cleaned from the : VAS6122  .

-- Remove the bolt -arrow- and then remove the oil return line.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connectors:

Courtesy of AUDI OF AMERICA, LLC

1 - For the Turbocharger Recirculation Valve -N249-

3 - For Charge Air Pressure Control Module -GX34-

-- Press the release buttons on both sides, remove the hose -4- for the crankcase ventilation from the turbocharger.

-- Remove the bolts -arrows- and remove the connection -2-.

-- Free up the wires for the heated oxygen sensors.

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the screw-type clamp -arrow-, press the catalytic converter to the right side.

-- Remove the bolts -arrows- and remove the heat shield -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Pry out the locking plates -arrows- and dispose.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1- and then remove the coolant return line.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -2- and the oil supply line.

-- Remove the nuts -arrows-.

-- Remove the turbocharger from the threaded pins in the direction of -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Have a second technician hold the turbocharger.

-- Remove the bolt -1- and the coolant supply line -2-, to do so push the heat shield to the side.

-- Remove the turbocharger upward.