Charge Air Pressure Control Module -GX34-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, and 2021 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Press the control rod onto the ball pin until it engages audibly.
-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
After removing, installing or replacing the Charge Air Pressure Control Module -GX34-, adaptations must be performed. Refer to PERFORM ADAPTATIONS AFTER COMPONENT REPLACEMENT .