Overview - Charge Air System

WARNING: This page is about a different car, the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, and 2021 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Charge Air System

Courtesy of AUDI OF AMERICA, LLC

Charge Air Cooler
- Removing and Installing. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING .
- If there are small impressions on the fins. Refer to RADIATOR AND CONDENSER ASSEMBLY .
Air Duct Hose
- Must be free of oil and grease before installing
From the Turbocharger
Bolt
- Position the bolt by hand and tighten it until it finds the old threads. Then tighten the bolt to the specification.
- 7 Nm
- Thread cutting
Charge Air Pressure Sensor -G31-
- There are different versions. Refer to the Parts Information for the allocation.
- Removing and Installing. Refer to Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING .
O-Ring
- Not available separately; replace if leaking -item 5- OVERVIEW - CHARGE AIR SYSTEM => List Item: Charge Air Pressure Sensor -G31- or damaged
to Intake Manifold
Seal
- Replace if damaged
Air Duct Pipe
- There are different versions. Refer to the Parts Information for the allocation.
- Must be free of oil and grease before installing
Seal
- Replace if damaged