Exhaust Pipes/Muffler, Separating, AUDI Q5

Special tools and workshop equipment required 

• Chain Pipe Cutter:VAS6254 

• A separating point has been provided in the connecting pipe for individual replacement of the center or rear muffler.
• The separating point is marked by an indentation around the circumference of the exhaust pipe.

Procedure 

Courtesy of AUDI OF AMERICA, LLC

-- Separate the exhaust pipes at a right angle at the notch -arrow- using a :VAS6254  .

-- When installing, position the clamping sleeves -arrows- on the center of the separation cut.

Courtesy of AUDI OF AMERICA, LLC

-- Install the clamping sleeves. Refer to the appropriate service information .

-- Install the exhaust system without tension. Refer to EXHAUST SYSTEM, INSTALLING WITHOUT TENSION .

Tightening Specifications 

• Refer to OVERVIEW - MUFFLER, AUDI Q5