Ribbed Belt, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, and 2021 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Install the ribbed belt. Refer to Figure.
-- Turn the tensioning system slightly in the direction of -arrow- and remove the :T10060A .
-- Release the tension on the tensioner.
-- Check whether the ribbed belt is routed correctly.
-- Start the engine and check whether the ribbed belt runs correctly.