Center Bumper Cover Mount, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Free up the wiring harness -2-.
-- If equipped, disconnect the connector on the garage door opener control module.
-- Remove the nuts -arrows-.
-- Remove the center mount -1-.