Bumper Cover End Plate, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .
-- Detach the front section of the front wheel housing liner near the bumper. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING, FRONT SECTION .
-- Remove the bolts -1, 3, 4 and 5-.
-- Pull the front bumper cover end panel -2- in the direction of travel toward the rear.