LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Front Doors, Central Locking System (Fy & 87)) >> 57 Front Doors, Central Locking System >> Central Locking >> Comfort System Central Control Module -J393-, REMOVING AND INSTALLING >> Removing

Comfort System Central Control Module -J393-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the Relay and Fuse Panel 2 -SR2-. Refer to OVERVIEW - RELAY PANELS, FUSE PANELS AND E-BOXES .

-- Release the catches -1 and 3-.

GWWA57-11074Courtesy of AUDI OF AMERICA, LLC

-- Pull the bracket -2- for the central control module slightly upward in direction of -arrow A- and at the same time remove on the outside from the threaded pin upward in direction of -arrow B-.

-- Remove the bracket for the central control module.

-- Disconnect the connectors -1, 2, 3, 4 and 6-.

GWWA57-11025Courtesy of AUDI OF AMERICA, LLC

-- Release the retainers in direction of -arrows- and guide the central control module -5- out of the mount.