Rear Lid Closing Assist Motor -V382-, REMOVING AND INSTALLING, SECURITY: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear lid lower trim panel. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .
-- Remove the closing assist cover protecting plate -item- 8.
-- Disengage the support bracket -7- by releasing the catches in direction of -A arrows-.
-- Disengage the release cable nipple -6- from the release lever -5-.
-- Disconnect the connector -3-.
-- Release the catches -2, 4 and 8- by turning them 90° clockwise in direction of -arrow B-.
-- Remove the Rear Lid Closing Assist Motor -V382- -1-.