Adjusting Buffer, Removing And Installing, Body Side: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
TIP:
To secure the adjusting buffer, the Pop Rivet Screw:WHT 005 180 must be inserted using the Pop Rivet Pliers:VAG1765C and Pop Rivet Pliers - Supplement Pieces :VAG1765C/2 .
-- Adjust the adjusting buffer. Refer to HEIGHT, ADJUSTING USING ADJUSTING BUFFER .