LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Hood, Lids (Fy & 87)) >> 55 Hood, Lids >> Fuel Filler Door Unit >> Emergency Release Cable, Removing And Installing >> Removing

Emergency Release Cable, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the fuel filler door unit. Refer to FUEL FILLER DOOR UNIT, REMOVING AND INSTALLING .

-- Remove the fuel filler door lock motor. Refer to Fuel Filler Door Lock Motor -V155-, REMOVING AND INSTALLING .

-- Thread the release cable -1- out of the guide -4-.

GWWA55-11112Courtesy of AUDI OF AMERICA, LLC

-- Disengage the tab -3- on the emergency release mount -2- and remove it from the support bracket.