Overview - Windshield Projection (Head-Up Display)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Windshield Projection (Head-Up Display)

Courtesy of AUDI OF AMERICA, LLC

Exterior Bracket
- For windshield projection control module
- Removing and Installing. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY OUTER BRACKET, REMOVING AND INSTALLING .
Nut
- 8 Nm
- Quantity: 3
Windshield Projection Head Up Display Control Module -J898-
- Removing and Installing. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, REMOVING AND INSTALLING .
- Calibrating. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, CALIBRATING .
Bolt
- Tightening sequence. Refer to Fig 2.
- Replace after removing.
- Quantity: 2
Expanding Rivet
- For air duct
Air Duct
- For windshield projection control module
Instrument Panel
Clip
Upper Cover
- Removing and Installing. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, REMOVING AND INSTALLING .
Expanding Rivet
- For air duct
Bolt
- Tightening Specifications and Sequence. Refer to Fig 2.
Bolt
- Tightening Specifications and Sequence. Refer to Fig 2.
- Replace after removing.
- Quantity: 2
Central Tube
Nut
- 8 Nm
- Quantity: 3
Interior Bracket
- For windshield projection control module
- Removing and Installing. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY INNER BRACKET, REMOVING AND INSTALLING .

Windshield Projection Head Up Display Control Module - Tightening Specification and Sequence

Fig 2: Windshield Projection Head Up Display Control Module

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in the sequence shown.

Bolts	Tightening Specification
-1-	5.5 Nm
-2 and 3-	4 Nm