Vibration Damper, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Audi SQ5, 2021 Audi SQ5, 2020 Audi SQ5, 2019 Audi SQ5, and 2018 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Additional procedures:
- Secure all hose connections with hose clamps that match the ones used in series production.
-- Connect the coolant hose to the connector coupling. Refer to Fig 1.
-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .
-- Install the lock carrier cover, right and left air intake grille as well as the bumper cover end plate. Refer to Front Bumper .