Rear Lid Opener Control Module -J938-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bolts -arrows- on the lower section of the bumper cover.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connectors -3 and 4-.

Courtesy of AUDI OF AMERICA, LLC

-- Release the catches -1 and 5-.

-- Remove the control module -2- from the mount.