Latch Release Lever Release Cable, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the latch release lever mounting bracket. Refer to LATCH RELEASE LEVER MOUNTING BRACKET, REMOVING AND INSTALLING .
-- Remove the vehicle electrical system control module bracket. Refer to OVERVIEW - RELAY PANELS, FUSE PANELS AND E-BOXES .
-- Remove the plenum chamber cover. Refer to PLENUM CHAMBER COVER, REMOVING AND INSTALLING .
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Release the retainers -arrows- and remove the housing cover -1-.
-- Loosen the release cable -4- from the support bracket -3- and disengage the release cable nipple -2-.
-- Free up the release cable at the lock carrier and the body.
-- Remove the grommet and remove the release cable outward.