Towing Recognition Control Module -J345-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Open the left luggage compartment side trim panel cover.
-- If equipped, remove the Digital Sound System Control Module -J525- with the bracket. Refer to CONTROL MODULE/DIGITAL SOUND SYSTEM AMPLIFIER, REMOVING AND INSTALLING .
-- Disconnect the connectors -2 to 5-.
-- Release the retainer -arrow- and remove the towing recognition control module -1- from the frame.