LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Exterior Equipment (Fy & 87)) >> 66 Exterior Equipment >> Roof Molding/Roof Railing >> Roof Railing, Removing And Installing >> Roof Railing, Removing And Installing, Security >> Removing

Roof Railing, Removing And Installing, Security: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the head curtain airbag with igniter -1- on the B-pillar from the body. The head curtain airbag remains installed. Refer to HEAD CURTAIN AIRBAG WITH IGNITER, REMOVING AND INSTALLING .

-- Remove the bolts -2- and remove the cover protecting plate for the roof rack recognition sensor -1-.

GWWA60-10845Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2-.

GWWA66-11929Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -arrows- using the :T40078  .

-- Remove the roof railing upward.