Roof Rack Recognition Sensor -G625-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the roof railing. Refer to ROOF RAILING, REMOVING AND INSTALLING .
-- Remove the cover protecting plate for the roof rack recognition sensor -1-.
-- Disconnect the connector -5- and remove the wiring harness.
-- Remove the seal -1-.
-- Release the catches -2 and 4- through the openings -arrows- and remove the sensor -3-.