Overview - Roof Railing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Roof Railing

Courtesy of AUDI OF AMERICA, LLC

Nut
- Insert with locking fluid. Refer to the Parts Information
- Tightening specification and sequence. Refer to Fig 2.
Lifter
- 1 Nm
- Removing and Installing. Refer to LIFTER, REMOVING AND INSTALLING .
- Insert with locking fluid. Refer to the Parts Information.
Seal
Seal
O-Ring
Roof Railing
- Removing and Installing. Refer to ROOF RAILING, REMOVING AND INSTALLING .
O-Ring
Seal
Seal
Seal
Roof Rack Recognition Sensor -G625-
- Market-Specific Version
- Removing and Installing. Refer to Roof Rack Recognition Sensor -G625-, REMOVING AND INSTALLING .
Seal
- Market-specific
Lifter
- 1 Nm
- Removing and Installing. Refer to LIFTER, REMOVING AND INSTALLING .
- Insert with locking fluid. Refer to the Parts Information.
Nut
- Insert with locking fluid. Refer to the Parts Information.
- Tightening specification and sequence. Refer to Fig 2.
Wire

Roof Railing - Tightening Specification and Sequence

Fig 2: Roof Railing - Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the nuts to 10 Nm in the sequence -1 through 4-.