Exhaust Door Control Unit -J883-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2022 Audi SQ5, 2021 Audi SQ5, 2020 Audi SQ5, 2019 Audi SQ5, and 2018 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Exhaust Door Control Unit

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal and note the following:

Replace the nuts after removing.

-- Bring the exhaust door control unit into its installed position

The spring -2- must engage the groves of the exhaust flap -1-.