Turbocharger, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi SQ5 and 2021 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Free up the wiring harness -3-.
-- Remove the screws -arrows-.
-- Remove the connection and hose -1- for the crankcase ventilation to do so press the release buttons on both sides.
-- Move the connection to the side.
-- Press the release buttons on both sides and disconnect the EVAP system hose -arrow-.
-- Remove the bolts -arrows- for the air guide pipe -1-.
-- Remove the bolt -3- and the line -2- for the EVAP system and move to the side.
All additional procedures are described under: TURBOCHARGER, REMOVING AND INSTALLING .