Overview - Charge Air System
WARNING: This page is about a different car, the 2022 Audi SQ5 and 2021 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Body-Side Charge Air System
- Charge Air Cooler
- Removing and installing. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING .
- With small impressions on the slats. Refer to RADIATOR AND CONDENSER ASSEMBLY .
- Air Duct Hose
- Must be free of oil and grease before installing
- From the Turbocharger
- To Intake Manifold
- Seal
- Replace if damaged
- Charge Air Pressure Sensor -G31-
- Removing and installing. Refer to Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING .
- Bolt
- 7 Nm
- Position the bolt by hand and tighten it until it finds the old threads. Then tighten the bolt to the specification.
- Repair solution for broken catch
- Thread cutting
- O-Ring
- Always replace after removing.
- Air Duct Pipe
- Must be free of oil and grease before installing
- Seal
- Always replace if damaged