Overview - Fender Bracing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Quantity: 3
- Tightening sequence. Refer to Fig 1.
- Bolt
- Tightening sequence. Refer to Fig 1.
- Bolt
- Quantity: 2
- Tightening sequence. Refer to Fig 1.
- Bolt
- 25 Nm
- Quantity: 2
- Bolt
- 25 Nm
- Quantity: 3
- Tension Strut
- Removing and Installing. Refer to TENSION STRUT, REMOVING AND INSTALLING .
- Bolt
- 25 Nm
- Quantity: 2
- Bolt
- 25 Nm
- Quantity: 2
- Lower Reinforcement
- for the tension strut
- Bolt
- 25 Nm
- Quantity: 2
- Upper Reinforcement
- For the tension strut
- Bolt
- 25 Nm
- Quantity: 2
- Support
- For wheel blocker cover
- Removing and Installing. Refer to WHEEL BLOCKER COVER, REMOVING AND INSTALLING .
- Bolt
- 25 Nm
- Quantity: 2
- Wheel Blocker Cover
- Removing and Installing. Refer to WHEEL BLOCKER COVER, REMOVING AND INSTALLING .
- Bolt
- Quantity: 4
- Tightening sequence. Refer to Fig 1.
- Bolt
- Quantity: 2
- Tightening sequence. Refer to Fig 1.
Wheel Blocker Cover - Tightening Specification and Sequence
-- Tighten the bolts in the sequence shown.
| Bolts | Tightening Specification |
|---|---|
| -1 to 6, 11, 12- | 25 Nm |
| -7 through 10- | 36 Nm |