LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Crankshaft, Cylinder Block [CWGD,DECA,CZSE,DLZA,DKMB,CZSA,DCBD,DCBE]) >> 13 Crankshaft, Cylinder Block >> Crankshaft >> Sensor Wheel, Removing And Installing >> Installing

Sensor Wheel, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Audi SQ5, 2021 Audi SQ5, 2020 Audi SQ5, 2019 Audi SQ5, and 2018 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Install the drive plate. Refer to DRIVE PLATE, REMOVING AND INSTALLING .

-- If the transmission is replaced, perform the corresponding adaptations in the Guided Functions  "01 - Engine electronics, functions" or "0001 - Steps after replacing component" using the Vehicle Diagnostic Tester.

scientia non olet · About LEMON Manuals